What are the types of Deep Groove Ball Bearing?

Release time:

2023-05-18

Deep Groove Ball Bearing is mainly used to bear radial load, but it is also commonly used to bear radial and axial combined load. Especially when the speed of mechanical equipment is high and thrust bearings are not suitable, this bearing can be used to withstand bidirectional pure axial loads without maintenance during operation, making it a low-cost and widely used bearing. Deep Groove Ball Bearing models include: Deep Groove Ball Bearing (60000); Deep Groove Ball Bearing with stop groove in outer ring (60000N type); Deep Groove Ball Bearing (60000-ZN type) with dust cover on one side and stop groove on the outer ring on the other side; Deep Groove Ball Bearing (60000-2ZN type) with dust cover on both sides and stop groove on outer ring; Deep Groove Ball Bearing with dust cover on one side (60000Z type); Deep Groove Ball Bearing with dust cover on both sides (60000-2Z type); Deep Groove Ball Bearing with sealing ring on one side (60000-LS, 60000-RZ); Deep Groove Ball Bearing with sealing rings on both sides (60000-2LS, 60000-2RZ); Flange outer ring Deep Groove Ball Bearing (F60000 type); Flange outer ring Deep Groove Ball Bearing with dust cover on one side (F60000-Z type); There are 11 kinds of flange outer ring Deep Groove Ball Bearing (F60000-2Z type) with dust covers on both sides.

Latest News

Post code for self-aligning roller bearings

Install the tapered hole self-aligning roller bearings with the rear codes K and K30 on the matching locking sleeve to become the K+H and K30+H type bearings with the rear codes. This type of bearing can be installed on an optical shaft without a shoulder, and is suitable for occasions where frequent installation and disassembly of bearings are required. In order to improve the lubrication performance of the bearing, there is an annular oil groove on the outer ring of the bearing and three evenly distributed oil holes are drilled, with the post code W33.

2023-05-18

The use of self-aligning roller bearings

Main applicable cages: stamped steel plate reinforced cages (suffix E, rarely found in China). Stamped steel plate type cage (suffix CC), glass fiber reinforced polyamide 66 cage (suffix TVPB), and machined brass two-piece cage (suffix MB). Machined brass integral cages (suffix CA), stamped steel plate cages for vibration applications (suffix JPA). Brass cage for vibration situations (suffix EMA).

2023-05-18

Installation of four row tapered roller bearings

The fit between the inner ring of the four row tapered roller bearing and the roller neck is generally with clearance. When installing, first install the bearing into the bearing box, and then install the bearing box into the journal.