XINNENG METALS

Post code for self-aligning roller bearings

Release time:

2023-05-18

Install the tapered hole self-aligning roller bearings with the rear codes K and K30 on the matching locking sleeve to become the K+H and K30+H type bearings with the rear codes. This type of bearing can be installed on an optical shaft without a shoulder, and is suitable for occasions where frequent installation and disassembly of bearings are required. In order to improve the lubrication performance of the bearing, there is an annular oil groove on the outer ring of the bearing and three evenly distributed oil holes are drilled, with the post code W33.
Specific classification and model comparison:
1. Self aligning roller bearing (20000 CC type)
2. Tapered hole self-aligning roller bearing (20000 CCK type)
3. Self aligning roller bearing (20000 CC/W33 type)
4. Tapered hole self-aligning roller bearing (20000 CCK/W33 type)
5. Bore aligning roller bearing installed on the locking sleeve (20000 CCK+H0000 type)
6. Bore aligning roller bearing installed on the locking sleeve (20000 CCK/W33+H0000 type)

Latest News

Post code for self-aligning roller bearings

Install the tapered hole self-aligning roller bearings with the rear codes K and K30 on the matching locking sleeve to become the K+H and K30+H type bearings with the rear codes. This type of bearing can be installed on an optical shaft without a shoulder, and is suitable for occasions where frequent installation and disassembly of bearings are required. In order to improve the lubrication performance of the bearing, there is an annular oil groove on the outer ring of the bearing and three evenly distributed oil holes are drilled, with the post code W33.

2023-05-18

The use of self-aligning roller bearings

Main applicable cages: stamped steel plate reinforced cages (suffix E, rarely found in China). Stamped steel plate type cage (suffix CC), glass fiber reinforced polyamide 66 cage (suffix TVPB), and machined brass two-piece cage (suffix MB). Machined brass integral cages (suffix CA), stamped steel plate cages for vibration applications (suffix JPA). Brass cage for vibration situations (suffix EMA).

2023-05-18

Installation of four row tapered roller bearings

The fit between the inner ring of the four row tapered roller bearing and the roller neck is generally with clearance. When installing, first install the bearing into the bearing box, and then install the bearing box into the journal.

2023-05-18

What are the types of Deep Groove Ball Bearing?

Deep Groove Ball Bearing is mainly used to bear radial load, but it is also commonly used to bear radial and axial combined load. Especially when the speed of mechanical equipment is high and thrust bearings are not suitable, this bearing can be used to withstand bidirectional pure axial loads without maintenance during operation, making it a low-cost and widely used bearing. Deep Groove Ball Bearing models include: Deep Groove Ball Bearing (60000);

2023-05-18

What are the characteristics of Deep Groove Ball Bearing?

After the Deep Groove Ball Bearing is installed on the shaft, the axial displacement in both directions of the shaft or housing can be limited within the axial clearance range of the bearing, so the axial positioning can be made in both directions. In addition, this type of bearing also has a certain degree of centering ability. When tilted 2 'to 10' relative to the casing hole, it can still work normally, but it has a certain impact on the bearing life.

2023-05-18

< 1...66676869 >