XINNENG METALS

How does thrust ball bearing work?

Release time:

2023-05-18

Thrust ball bearing is a separate type of bearing, where the shaft ring and seat ring can be separated from the components of the cage and steel ball. The shaft ring is a sleeve that fits with the shaft, and the seat ring is a sleeve that fits with the bearing seat hole, with a gap between it and the shaft; Thrust ball bearings can only withstand axial loads, unidirectional thrust ball bearings can only withstand axial loads in one direction, and bidirectional thrust ball bearings can withstand axial loads in two directions; Thrust ball bearings cannot limit the radial displacement of the shaft, and the limit speed is very low. Unidirectional thrust ball bearings can limit the axial displacement of the shaft and shell in one direction, while bidirectional bearings can limit the axial displacement of both directions.
Thrust ball bearing is a separate type of bearing, where the shaft ring and seat ring can be separated from the components of the cage and steel ball. The shaft ring is a sleeve that fits with the shaft, and the seat ring is a sleeve that fits with the bearing seat hole, with a gap between it and the shaft; Thrust ball bearings can only withstand axial loads, unidirectional thrust ball bearings can only withstand axial loads in one direction, and bidirectional thrust ball bearings can withstand axial loads in two directions; Thrust ball bearings cannot limit the radial displacement of the shaft, and the limit speed is very low. Unidirectional thrust ball bearings can limit the axial displacement of the shaft and shell in one direction, while bidirectional bearings can limit the axial displacement of both directions.

Latest News

Post code for self-aligning roller bearings

Install the tapered hole self-aligning roller bearings with the rear codes K and K30 on the matching locking sleeve to become the K+H and K30+H type bearings with the rear codes. This type of bearing can be installed on an optical shaft without a shoulder, and is suitable for occasions where frequent installation and disassembly of bearings are required. In order to improve the lubrication performance of the bearing, there is an annular oil groove on the outer ring of the bearing and three evenly distributed oil holes are drilled, with the post code W33.

2023-05-18

The use of self-aligning roller bearings

Main applicable cages: stamped steel plate reinforced cages (suffix E, rarely found in China). Stamped steel plate type cage (suffix CC), glass fiber reinforced polyamide 66 cage (suffix TVPB), and machined brass two-piece cage (suffix MB). Machined brass integral cages (suffix CA), stamped steel plate cages for vibration applications (suffix JPA). Brass cage for vibration situations (suffix EMA).

2023-05-18

Installation of four row tapered roller bearings

The fit between the inner ring of the four row tapered roller bearing and the roller neck is generally with clearance. When installing, first install the bearing into the bearing box, and then install the bearing box into the journal.

2023-05-18

What are the types of Deep Groove Ball Bearing?

Deep Groove Ball Bearing is mainly used to bear radial load, but it is also commonly used to bear radial and axial combined load. Especially when the speed of mechanical equipment is high and thrust bearings are not suitable, this bearing can be used to withstand bidirectional pure axial loads without maintenance during operation, making it a low-cost and widely used bearing. Deep Groove Ball Bearing models include: Deep Groove Ball Bearing (60000);

2023-05-18

What are the characteristics of Deep Groove Ball Bearing?

After the Deep Groove Ball Bearing is installed on the shaft, the axial displacement in both directions of the shaft or housing can be limited within the axial clearance range of the bearing, so the axial positioning can be made in both directions. In addition, this type of bearing also has a certain degree of centering ability. When tilted 2 'to 10' relative to the casing hole, it can still work normally, but it has a certain impact on the bearing life.

2023-05-18

< 1...66676869 >