XINNENG METALS

Everything You Need to Know About 239 Series CA/CC Spherical Roller Bearings

Release time:

2024-03-17

Spherical roller bearings are essential components in various industrial equipment, providing support for rotating shafts while accommodating misalignment and axial displacement. The 239 Series CA/CC Spherical Roller Bearings are known for their high load-carrying capacity and robust design, making them ideal for heavy-duty applications.
These bearings are designed with a symmetrical roller profile and optimized internal geometry to ensure enhanced load distribution and reduced friction. The CA design features a machined brass cage, while the CC design incorporates a stamped steel cage. Both designs offer excellent performance in demanding operating conditions.
When selecting 239 Series CA/CC Spherical Roller Bearings for your application, it is crucial to consider factors such as load capacity, operating speed, misalignment tolerance, and lubrication requirements. Proper installation and maintenance practices also play a significant role in maximizing the service life of these bearings.
In conclusion, 239 Series CA/CC Spherical Roller Bearings are reliable components that offer high performance and durability in industrial applications. By understanding their design features and application considerations, you can make informed decisions when choosing bearings for your equipment.

Latest News

Post code for self-aligning roller bearings

Install the tapered hole self-aligning roller bearings with the rear codes K and K30 on the matching locking sleeve to become the K+H and K30+H type bearings with the rear codes. This type of bearing can be installed on an optical shaft without a shoulder, and is suitable for occasions where frequent installation and disassembly of bearings are required. In order to improve the lubrication performance of the bearing, there is an annular oil groove on the outer ring of the bearing and three evenly distributed oil holes are drilled, with the post code W33.

2023-05-18

The use of self-aligning roller bearings

Main applicable cages: stamped steel plate reinforced cages (suffix E, rarely found in China). Stamped steel plate type cage (suffix CC), glass fiber reinforced polyamide 66 cage (suffix TVPB), and machined brass two-piece cage (suffix MB). Machined brass integral cages (suffix CA), stamped steel plate cages for vibration applications (suffix JPA). Brass cage for vibration situations (suffix EMA).

2023-05-18

Installation of four row tapered roller bearings

The fit between the inner ring of the four row tapered roller bearing and the roller neck is generally with clearance. When installing, first install the bearing into the bearing box, and then install the bearing box into the journal.

2023-05-18

What are the types of Deep Groove Ball Bearing?

Deep Groove Ball Bearing is mainly used to bear radial load, but it is also commonly used to bear radial and axial combined load. Especially when the speed of mechanical equipment is high and thrust bearings are not suitable, this bearing can be used to withstand bidirectional pure axial loads without maintenance during operation, making it a low-cost and widely used bearing. Deep Groove Ball Bearing models include: Deep Groove Ball Bearing (60000);

2023-05-18

What are the characteristics of Deep Groove Ball Bearing?

After the Deep Groove Ball Bearing is installed on the shaft, the axial displacement in both directions of the shaft or housing can be limited within the axial clearance range of the bearing, so the axial positioning can be made in both directions. In addition, this type of bearing also has a certain degree of centering ability. When tilted 2 'to 10' relative to the casing hole, it can still work normally, but it has a certain impact on the bearing life.

2023-05-18

< 1...66676869 >