XINNENG METALS

Installation of four row tapered roller bearings

Release time:

2023-05-18

Installation of four row tapered roller bearings (installation of roller bearings):
1、 The fit between the inner ring of the four row tapered roller bearing and the roller neck is generally with clearance. When installing, first install the bearing into the bearing box, and then install the bearing box into the journal.
2、 The outer ring of the four row tapered roller bearing and the bearing housing hole also use a dynamic fit. First, install the outer ring A into the bearing housing. When leaving the factory, the outer ring, inner ring, and inner and outer spacer rings are printed with the symbol 'HotTag'. During installation, they must be installed in the bearing box in the order of the character symbols. It cannot be interchanged arbitrarily to prevent changes in bearing clearance.
3、 After all the parts are installed in the bearing box, tighten the inner ring and inner spacer ring, and the outer ring and outer spacer ring axially.
4、 Measure the gap width between the outer ring end face and the bearing box cover plate to determine the thickness of the corresponding sealing gasket.
Multiple sealed bearings are marked with the post code XRS.

Latest News

How to choose the type of bearing

There are also relevant introductions on how to choose the brand and type of bearings, but some common sense about bearings that are more biased, or are often ignored or ignored, often play a very important role in the use of bearings. Learn about it.

2023-05-18

What Are Bearings Used For?

Its role should be support, that is, literal interpretation used to bear the shaft, but this is only a part of its role, support its essence is able to bear radial load.  You can also understand that it's used to fix the axis.  It is fixed axis so that it can only achieve rotation, and control its axial and radial movement.

2023-05-18

How Should Bearings Be Cleaned?

Bearing as an important mechanical parts, widely used in the living environment.  An important indicator of bearing quality is bearing cleanliness. It is necessary to carry out effective cleaning of bearings in the process of production and use to prolong their service life.

2023-05-18

How deep groove ball bearings work

Deep groove ball bearings mainly bear radial load, and can also bear radial load and axial load at the same time. When it is only subjected to radial load, the contact angle is zero. When the deep groove ball bearing has a large radial clearance, it has the performance of an angular contact bearing and can bear a large axial load. The friction coefficient of the deep groove ball bearing is very small, and the limit speed is also high.

2023-05-18

< 1...66676869 >